Logging And Network Management Command Set
Configuring RMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-85
11.2.4.27 show rmon channel
Use this command to display RMON channel entries for one or more ports.
show rmon channel [port-string]
Syntax Description
Command Defaults
If port-string is not specified, information about all channels will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON channel information for fe.2.12:
port-string (Optional) Displays RMON channel entries for a specific
port(s).
Matrix(rw)->show rmon channel fe.2.12
Port fe.2.12 Channel index= 628 EntryStatus= valid
----------------------------------------------------------
Control off AcceptType matched
OnEventIndex 0 OffEventIndex 0
EventIndex 0 Status ready
Matches 4498
Description Thu Dec 16 12:57:32 EST 2004
Owner NetSight smith
To Next Page
Loading...
