Routing Protocol Configuration Command Set
Configuring RIP
13-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
13.2.2.9 key chain
Creates or deletes a key chain used globally for RIP authentication.
key chain name
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command deletes the specified key chain:
no key chain name
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router1(config)#
Command Defaults
None.
Example
This example shows how to create a RIP authentication key chain called “md5key”:
name Specifies a name for the key chain.
Matrix>Router1(config)#key chain md5key
To Next Page
Loading...
