Configuring LACP
Configuring Link Aggregation
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-113
4.5.4.12 show port lacp
Use this command to display link aggregation information for one or more underlying physical
ports.
show port lacp port port-string {[status {detail | summary}] | [counters]} [sort
{port | lag}]
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
port port-string Displays LACP information for specific port(s). For a
detailed description of possible port-string values, refer
to Section 4.1.1.
status detail |
summary
Displays LACP status in detailed or summary
information.
counters Displays LACP counter information.
sort port | lag (Optional) When summary is specified, sorts display by
port designation or LAG ID.
To Next Page
Loading...
