General Configuration Command Set
Managing Configuration and Image Files
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-131
2.2.9.1 dir
Use this command to list files stored in the file system.
dir [filename]
Syntax Description
Command Type
Switch.
Command Mode
Read-Only.
Command Defaults
If filename is not specified, all files in the system will be displayed.
Example
This example shows how to list all the files in the system:
Table 2-8 provides an explanation of the command output.
filename (Optional) Specifies the file name or directory to list.
Matrix(rw)->dir
Filename: 04.21.03 (Active) (Boot)
Version: 04.21.03
Size: 5494579 (bytes)
Date: FRI JUL 30 08:50:40 2004
CheckSum: f564c266c3a5907a9f3750dd17db6999
Location: slot1
Compatibility: 7G4202-30, 7G4202-60, 7G4270-09, 7G4270-10,
7G4270-12, 7G4282-41, 7H4202-72, 7H4203-72,
7H4284-49, 7H4382-25, 7H4382-49, 7H4383-49,
7H4385-49, 7K4290-02, 2G4072-52
Files:
=====================================================
slot1:
FEB 24 2004 15:25:24 7060 sample.cfg
To Next Page
Loading...
