Enterasys Matrix 2G4072-52 - Clear Cos Violation Irl

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-91
8.3.3.24 clear cos violation irl
Use this command to clear Class of Service inbound rate limiting violation configurations.
clear cos violation irl {all | disabled-ports | violation-index} {both | status |
counter}
Syntax Description
Command Defaults
If no options are specified, all information for all types of CoS violations will be
displayed.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear both status and counters from all CoS inbound rate limiting
violation entries:
all Clears all inbound rate limiting violation entries.
disabled-ports Clears the list of ports that are disabled because of
violating an inbound rate limiter.
violation-index Clears the entry for a specific violation index.
both | status |
counter
Clears the violation status, the violation counter, or both.
Matrix(rw)->clear cos violation irl all both