General Configuration Command Set
Configuring Power over Ethernet (PoE)
2-106 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.5.9 clear inlinepower assigned
Use this command to clear the power value manually assigned to one or more modules.
clear inlinepower assigned [slot-number]
Syntax Description
Command Defaults
If slot-number is not specified, power value assignments will be cleared from all
modules.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear power assignments to all modules in the chassis:
slot-number (Optional) Clears the power assignment from a specific
module.
Matrix(rw)->clear inlinepower assigned
To Next Page
Loading...
