Enterasys Matrix 2G4072-52 - Clear Spantree Mstcfgid

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-32 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.20 clear spantree mstcfgid
Use this command to reset the MST revision level to a default value of 0, and the configuration
name to a default string representing the bridge MAC address.
clear spantree mstcfgid
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the MST configuration identifier elements to default values:
Matrix(rw)->clear spantree mstcfgid