Security Configuration Command Set
Configuring TACACS+
14-30 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.4.5 clear tacacs server
Use this command to remove one or all configured TACACS+ servers, or to return the timeout value
to its default value for one or all configured TACACS+ servers.
clear tacacs server {all | index} [timeout]
Syntax Description
Command Defaults
If timeout is not specified, the affected TACACS+ servers will be removed.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example removes TACACS+ server 1.
all Specifies that all configured TACACS+ servers should be
affected.
index Specifies one TACACS+ server to be affected.
timeout (Optional) Return the timeout value to its default value of
10 seconds.
Matrix(rw)->clear tacacs server 1
To Next Page
Loading...
