Enterasys Matrix 2G4072-52 - Clear Rmon Capture

Logging And Network Management Command Set
Configuring RMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-97
11.2.4.35 clear rmon capture
Use this command to clears an RMON capture entry.
clear rmon capture index
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear RMON capture entry 1:
index Specifies the capture entry to be cleared.
Matrix(rw)->clear rmon capture 1