Enterasys Matrix 2G4072-52 - Table of Contents

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-7
• set spantree tctrapsuppress (Section 6.2.1.46)
• clear spantree tctrapsuppress (Section 6.2.1.47)
• show spantree txholdcount (Section 6.2.1.48)
• set spantree txholdcount (Section 6.2.1.49)
• clear spantree txholdcount (Section 6.2.1.50)
• show spantree maxhops (Section 6.2.1.51)
• set spantree maxhops (Section 6.2.1.52)
• clear spantree maxhops (Section 6.2.1.53)
• show spantree spanguard (Section 6.2.1.54)
• set spantree spanguard (Section 6.2.1.55)
• clear spantree spanguard (Section 6.2.1.56)
• show spantree spanguardtimeout (Section 6.2.1.57)
• set spantree spanguardtimeout (Section 6.2.1.58)
• clear spantree spanguardtimeout (Section 6.2.1.59)
• show spantree spanguardlock (Section 6.2.1.60)
• clear / set spantree spanguardlock (Section 6.2.1.61)
• show spantree spanguardtrapenable (Section 6.2.1.62)
• set spantree spanguardtrapenable (Section 6.2.1.63)
• clear spantree spanguardtrapenable (Section 6.2.1.64)
• show spantree backuproot (Section 6.2.1.65)
• set spantree backuproot (Section 6.2.1.66)
• clear spantree backuproot (Section 6.2.1.67)
• show spantree backuproottrapendable (Section 6.2.1.68)
• set spantree backuproottrapenable (Section 6.2.1.69)
• clear spantree backuproottrapenable (Section 6.2.1.70)
• show spantree newroottrapendable (Section 6.2.1.71)
• set spantree newroottrapenable (Section 6.2.1.72)