IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-81
12.2.8.7 show ip slb reals
Use this command to display information about the real servers.
show ip slb reals [detail | serverfarm serverfarmname [detail]]
Syntax Description
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If detail is not specified, summary information about all configured server farms
will be displayed.
Examples
These examples show how to display summary and detailed information about real servers in the
“ten” server farm:
detail (Optional) Displays detailed output for a specific server
farm or for all configured server farms.
serverfarm
serverfarmname
Specifies a server farm name for which to display
information.
Matrix Router1(config)#>Router1>show ip slb reals
real-serv-ip:port server-farm type ins stat wgt maxcon conns
------------------------------------------------------------------------------
192.169.1.11:23 matrix both IS UP 1 N\A 0
192.169.1.10:23 matrix ping IS UP 1 2 0
192.169.2.14:21 ftpserver ping IS UP 1 N\A 0
192.169.2.13:21 ftpserver app IS UP 1 N\A 0
10.3.0.3:80 ten none IS UP 3 N\A 0
10.3.0.2:80 ten none IS UP 2 350 0
10.3.0.1:80 ten none IS UP 1 N\A 0
192.169.2.13:0 big ping IS UP 1 N\A 0
To Next Page
Loading...
Need help?
General