Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-55
4.3.6.4 set port mdix
Use this command to set MDI/MDIX mode on one or more ports.
set port mdix [port-string] {auto | mdi | mdix}
Syntax Description
Command Defaults
If port-string is not specified, mode will be set for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to force 1-Gigabit Ethernet port 14 in module 3 to MDIX configuration:
port-string (Optional) Sets mode for specific port(s). For a detailed
description of possible port-string values, refer to
Section 4.1.1.
auto Sets port(s) to automatically determine MDI/MDIX.
mdi Forces port(s) to MDI configuration.
mdix Forces port(s) to MDIX configuration.
Matrix(rw)->set port mdix ge.3.14 mdix
To Next Page
Loading...
Need help?
General