Security Configuration Command Set
Configuring MAC Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-93
14.3.7.12 set macauthentication macinitialize
Use this command to force a current MAC authentication session to re-initialize and remove the
session.
set macauthentication macinitialize mac_addr
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to force the MAC authentication session for address 00-60-97-b5-4c-07
to re-initialize:
mac_addr Specifies the MAC address of the session to re-initialize.
Matrix(rw)->set macauthentication macinitialize 00-60-97-b5-4c-07
To Next Page
Loading...
