Enterasys Matrix 2G4072-52 - Clear Lldp Port Med-Trap

Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
Matrix DFE-Platinum and Diamond Series Configuration Guide 3-59
3.2.4.22 clear lldp port med-trap
Use this command to return the port LLDP-MED trap setting to the default value of disabled.
clear lldp port med-trap port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-write.
Example
This example returns port ge.1.1 to the default LLDP-MED trap state of disabled.
port-string Specifies the port or range of ports to be affected.
Matrix(rw)->clear lldp port med-trap ge.1.1