Enterasys Matrix 2G4072-52 - Set Vlanauthorization

Security Configuration Command Set
Configuring RFC 3580
14-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.3.2 set vlanauthorization
Use this command to set the VLAN Authorization attributes.
set vlanauthorization enable | disable | port port-list {[enable | disable] none |
tagged | untagged | dynamic}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to enable VLAN Authorization:
This example shows how to enable VLAN Authorization for port ge.1.1 for tagged packets:
enable | disable enable - Enable VLAN Authorization.
disable - Disable VLAN Authorization.
port port-list (Optional) Set port(s) attributes for VLAN Authorization.
enable | disable enable - Enable port VLAN Authorization.
disable - Disable port VLAN Authorization.
none | tagged |
untagged |
dynamic
none - No egress change will be made.
tagged - Port added to egress.
untagged - Port added to untagged egress.
dynamic - Use information in authentication response.
Matrix(su)->set vlanauthorization enable
Matrix(su)->set vlanauthorization port ge.1.1 enable tagged