General Configuration Command Set
Managing the Management Authentication Notification MIB
2-36 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.2 Managing the Management Authentication Notification MIB
Purpose
This MIB provides controls for enabling/disabling the sending of SNMP notifications when a user
login authentication event occurs for various management access types. The types of access
currently supported by the MIB include console, telnet, ssh, and web.
Commands
The CLI commands used to set the Management Authentication Notification are listed below and
described in the associated section as shown.
• show mgmt-auth-notify (Section 2.2.3.1)
• set mgmt-auth-notify (Section 2.2.3.2)
• clear mgmt-auth-notify (Section 2.2.3.3)
NOTE: Ensure that SNMP is correctly configured on the DFE in order to send these
notifications. Refer to
Chapter 5 for SNMP configuration information.
To Next Page
Loading...
Need help?
General