Enterasys Matrix 2G4072-52 - Show Snmp View

SNMP Configuration Command Set
Configuring SNMP MIB Views
5-34 Matrix DFE-Platinum and Diamond Series Configuration Guide
5.3.4.1 show snmp view
Use this command to display the MIB configuration for SNMPv3 view-based access (VACM).
show snmp view [viewname] [subtree oid-or-mibobject] [volatile | nonvolatile |
read-only]
Syntax Description
Command Defaults
If no parameters are specified, all SNMP MIB view configuration information will
be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
viewname (Optional) Displays information for a specific MIB view.
subtree
oid-or-mibobject
(Optional) Displays information for a specific MIB
subtree when viewname is specified.
volatile |
nonvolatile |
read-only
(Optional) Displays entries for a specific storage type.