IGMP Configuration Command Set
Enabling / Disabling IGMP
Matrix DFE-Platinum and Diamond Series Configuration Guide 10-3
10.4 IGMP CONFIGURATION COMMAND SET
10.4.1 Enabling / Disabling IGMP
Purpose
To display IGMP information and to enable or disable IGMP snooping on the device.
Commands
The commands used to display, enable and disable IGMP are listed below and described in the
associated sections as shown.
• show igmp enable (Section 10.4.1.1)
• set igmp enable (Section 10.4.1.2)
• set igmp disable (Section 10.4.1.3)
To Next Page
Loading...
