Enterasys Matrix 2G4072-52 - Show Policy Profile

Policy Classification Configuration Command Set
Configuring Policy Profiles
8-4 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.1.1 show policy profile
Use this command to display policy profile information.
show policy profile {all | profile-index [consecutive-pids] [-verbose]}
Syntax Description
Command Defaults
If optional parameters are not specified, summary information will be displayed for
the specified index or all indexes.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display policy information for policy profile 11:
all | profile-index Displays policy information for all profile indexes or a
specific profile index.
consecutive-pids (Optional) Displays information for specified consecutive
profile indexes.
-verbose (Optional) Displays detailed information.
Matrix(rw)->show policy profile 11
Profile Index :11
Profile Name :MacAuth1
Row Status :active
Port VID Status :enabled
Port VID Override :11
CoS Status :disabled
CoS :0
Tagged Egress VLAN List :11
Forbidden VLAN List :none
Untagged VLAN List :none
Replace TCI Status :enabled
Admin Profile Usage :none
Oper Profile Usage :fe.2.1-2
Dynamic Profile Usage :fe.2.1-2