Preparing the Device for Router Mode
Reviewing and Configuring Routing Modules
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-165
2.3.2.3 clear router
Use this command to disable routing on a module.
clear router module
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set disable routing on module 1:
module Specifies the routing module to disable for routing.
Entering a value of 0 will disable all modules for routing.
Matrix(rw)->clear router 1
To Next Page
Loading...
