General Configuration Command Set
Setting Basic Device Properties
2-88 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.3.36 show physical assetid
Use this command to display the asset ID for a module.
show physical assetid module module
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display asset ID information for module 1. In this case, none has been
configured:
module module Specifies the module for which to display an asset ID.
Matrix(rw)->show physical assetid module 1
module-1 assetID=<empty string> entity=71
To Next Page
Loading...
