Port Configuration Command Set
Setting Console Port Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-7
4.3.1.1 show console
Use this command to display properties set for one or more console ports.
show console [port-string]
Syntax Description
Command Defaults
If port-string is not specified, properties for all console ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display properties for console port com.1.1:
port-string (Optional) Displays properties for specific console port(s)
Matrix(rw)->show console com.1.1
Port Baud Flow Bits StopBits Parity Autobaud
------------ ------ ------ ---- ---------- ------ --------
com.1.1 38400 ctsrts 8 one none disable
To Next Page
Loading...
