Enterasys Matrix 2G4072-52 - Show Spantree Spanguardtimeout

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-70 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.57 show spantree spanguardtimeout
Use this command to display the Spanning Tree span guard timeout setting.
show spantree spanguardtimeout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the span guard timeout setting:
Matrix(rw)->show spantree spanguardtimeout
spanguard timeout is set at 300 seconds.