General Configuration Command Set
Setting Basic Device Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-59
2.2.3.12 show time
Use this command to display the current time of day in the system clock.
show time
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current time. The output shows the day of the week, month,
day, and the time of day in hours, minutes, and seconds and the year:
Matrix(rw)->show time
THU SEP 05 09:21:57 2002
To Next Page
Loading...
