Port Configuration Command Set
Reviewing Port Status
4-28 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.2.3 show port counters
Use this command to display port counter statistics detailing traffic through the device and through
all MIB2 network devices.
show port counters [port-string] [switch | mib2]
Syntax Description
Command Defaults
• If port-string is not specified, counter statistics will be displayed for all ports.
• If mib2 or switch are not specified, all counter statistics will be displayed for
the specified port(s).
Command Type
Switch command.
Command Mode
Read-Only.
port-string (Optional) Displays counter statistics for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.1.
switch | mib2 (Optional) Displays switch or MIB2 statistics. Switch
statistics detail performance of the Matrix switch device.
MIB2 interface statistics detail performance of all network
devices.
To Next Page
Loading...
