Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-49
6.2.1.36 show spantree fwddelay
Use this command to display the Spanning Tree forward delay time.
show spantree fwddelay
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Spanning Tree forward delay time:
Matrix(rw)->show spantree fwddelay
Bridge Forward Delay is set to 15 seconds
To Next Page
Loading...
