Enterasys Matrix 2G4072-52 - General Configuration Command Set; Setting User Accounts and Passwords

General Configuration Command Set
Setting User Accounts and Passwords
2-24 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2 GENERAL CONFIGURATION COMMAND SET
2.2.1 Setting User Accounts and Passwords
Purpose
To change the device’s default user login and password settings, and to add new user accounts and
passwords.
Commands
The commands used to configure user accounts and passwords are listed below and described in the
associated section as shown.
• show system login (Section 2.2.1.1)
• set system login (Section 2.2.1.2)
• clear system login (Section 2.2.1.3)
• set password (Section 2.2.1.4)
• set system password length (Section 2.2.1.5)
• set system password aging (Section 2.2.1.6)
• set system password history (Section 2.2.1.7)
• show system lockout (Section 2.2.1.8)
• set system lockout (Section 2.2.1.9)