SNMP Configuration Command Set
Configuring SNMP MIB Views
5-38 Matrix DFE-Platinum and Diamond Series Configuration Guide
5.3.4.4 clear snmp view
Use this command to delete an SNMPv3 MIB view.
clear snmp view viewname subtree
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete SNMP MIB view “public”:
viewname Specifies the MIB view name to be deleted.
subtree Specifies the subtree name of the MIB view to be deleted.
Matrix(rw)->clear snmp view public 1.3.6.1
To Next Page
Loading...
Need help?
General