Port Configuration Command Set
Setting Console Port Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-23
4.3.1.17 clear console parity
Use this command to clear the parity type for one or more console ports.
clear console parity [port-string]
Syntax Description
Command Defaults
If port-string is not specified, parity type will be cleared for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear parity type on console port com.1.1:
port-string (Optional) Clears the parity type for specific console port(s).
Matrix(rw)->clear console parity com 1.1
To Next Page
Loading...
