VLAN Configuration Command Set
Creating and Naming Static VLANs
7-10 Matrix DFE-Platinum and Diamond Series Configuration Guide
7.3.2.4 clear vlan name
Use this command to remove the name of a VLAN from the VLAN list.
clear vlan name vlan-list
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the name for VLAN 9:
vlan-list Specifies the VLAN ID of the VLAN(s) for which the name
will be cleared.
Matrix(rw)->clear vlan name 9
To Next Page
Loading...
