Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
6-134 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.3.13 show spantree lpwindow
Use this command to display the current Loop Protect event window value.
show spantree lpwindow
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current Loop Protect window value:
Matrix(rw)->show spantree lpwindow
LoopProtect event window is set to 120 seconds
To Next Page
Loading...
