Enterasys Matrix 2G4072-52 - Set Netflow Cache

Logging And Network Management Command Set
Configuring NetFlow
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-157
11.2.8.2 set netflow cache
Use this command to enable (create) or disable (free up) a NetFlow cache on each DFE blade in the
Matrix system. A NetFlow cache maintains NetFlow information for all active flows. By default,
NetFlow caches are not created.
set netflow cache {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to enable, or create, a NetFlow cache on each DFE blade in the system
:
enable | disable Enable or disable the NetFlow cache.
Matrix(rw)->set netflow cache enable