Port Configuration Command Set
Reviewing Port Status
4-26 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.2.2 show port status
Use this command to display operating and admin status, speed, duplex mode and port type for one
or more ports on the device.
show port status [port-string] [-interesting]
Syntax Description
Command Defaults
If no options are specified, status information for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display status information for port ge.3.1 through 4:
This example shows how to display status information for console ports:
port-string (Optional) Displays status for specific port(s). For a
detailed description of possible port-string values, refer to
Section 4.1.1.
-interesting (Optional) Displays only ports with an operational status of
up or dormant.
Matrix(rw)->show port status ge.3.1-4
Port Alias Oper Admin Speed Duplex Type
(truncated) Status Status
------------ -------------- ------- ------- -------- ------- -------------
ge.3.14 up up 1 Gbps full 1000-SX MT-RJ
Matrix(rw)->show port status com.*.*
Port Alias Oper Admin Speed Duplex Type
(truncated) Status Status
------------ -------------- ------- ------- -------- ------- -------------
com.5.1 up up 38 Kbps RS232 RJ45
com.7.1 up up 38 Kbps RS232 RJ45