Startup and General Configuration Summary
Starting and Navigating the Command Line Interface
2-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
Figure 2-2 Matrix DFE-Platinum Startup Screen
2.1.6.5 Getting Help with CLI Syntax
The Matrix Series device allows you to display usage and syntax information for individual
commands by typing help or ? after the command.
2.1.6.6 Using Context-Sensitive Help
Entering help after a specific command will display usage and syntax information for that
command. This example shows how to display context-sensitive help for the set length command:
login: admin
Password:
M A T R I X DFE
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2005
Module Serial Number: 1234567
Module Firmware Revision: 05.11.00
Matrix DFE (su)->
Matrix(rw)->set length help
Command: set length Number of lines
Usage: set length <screenlength>
screenlength Length of the screen (5..512, 0 to disable 'more')
To Next Page
Loading...
Need help?
General