Security Configuration Command Set
Configuring MAC Locking
14-132 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.9.12 clear maclock
Use this command to clear MAC locking from one or more static MAC addresses.
clear maclock {all | mac-address port-string}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear MAC locking between MAC address 00-a0-c9-0d-32-11 and port
fe.2.3:
all Clears all static MAC locking for one or more ports.
mac_address Specifies the MAC address for which the MAC locking
will be cleared.
port_string Specifies the port on which to clear MAC locking. For a
detailed description of possible port_string values, refer
to Section 4.1.1.
Matrix(rw)->clear maclock 00-a0-c9-0d-32-11 fe.2.3
To Next Page
Loading...
