Port Configuration Command Set
Setting Console Port Properties
4-18 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.1.12 show console stopbits
Use this command to display the console port stop bits per character.
show console stopbits [port-string]
Syntax Description
Command Defaults
If port-string is not specified, stop bits per character will be displayed for all
console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to show stop bits per character on com.1.1:
port-string (Optional) Displays stop bits for specific console port(s).
Matrix(rw)->show console stopbits com.1.1
Port StopBits
------------ --------
com.1.1 one
To Next Page
Loading...
