Enterasys Matrix 2G4072-52 - Show Mtu

General Configuration Command Set
Enabling or Disabling the Path MTU Discovery Protocol
2-144 Matrix DFE-Platinum and Diamond Series Configuration Guide
2.2.10.1 show mtu
Use this command to display the status of the path MTU discovery protocol on the device.
show mtu
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display path MTU discovery status:
Matrix(rw)->show mtu
MTU discovery status: Enabled