Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-24 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.2.1 show policy rule
Use this command to display policy classification and admin rule information.
show policy rule [attribute] | [all] | [admin-profile] | [profile-index] [port-hit]
[ether | icmptype | ipdest | ipdestsocket | ipfrag | ipproto | ipsource |
ipsourcesocket | iptos | ipxclass | ipxdest | ipxsource | ipxdestsocket |
ipxsourcesocket | ipxtype | llcDsapSsap | macdest | macsource | port | tci |
tcpdestportip | tcpsourceportip | udpdestportip | udpsourceportip | vlantag]
[data] [mask mask] [port-string port-string] [rule-status {active | not-in-service
| not-ready}] [storage-type {non-volatile | volatile}] [vlan vlan] | [drop |
forward] [dynamic-pid dynamic-pid] [
cos cos] [admin-pid admin-pid] [syslog
{enable | disable}] [-verbose] [trap {enable | disable}] [disable-port {enable |
disable}] [usage-list] [display-if-used]
Syntax Description
attribute Displays the attributes of the specified rules.
all |
admin-profile |
profile-index
Displays all admin and classification rules, rules for the
admin profile, or for a specific profile-index number. Valid
index values are 1 - 1023.
port-hit Displays ports matching specified rules.
ether Displays Ethernet type II rules.
icmptype Displays ICMP type rules.
ipdest Displays IP destination address rules.
ipdestsocket Displays IP destination address rules with optional
post-fixed port.
ipfrag Displays IP fragmentation rules.
ipproto Displays IP protocol field in IP packet rules.
ipsource Displays IP source address rules.
ipsourcesocket Displays IP source address rules with optional post-fixed
port.
iptos Displays Type of Service rules.
ipxclass Displays IPX transmission control rules.
ipxdest Displays destination IPX address rules.
To Next Page
Loading...
Need help?
General