IGMP Configuration Command Set
Configuring IGMP
10-30 Matrix DFE-Platinum and Diamond Series Configuration Guide
10.4.2.21 show igmp number-groups
Use this command to display the number of multicast groups supported by the Matrix device. The
command displays both the currently active number of groups and the configured number that will
take effect at the next reboot.
show igmp number-groups
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-write.
Example
This example shows how to display the number of multicast groups supported by the device.
Matrix(rw)->show igmp number-groups
IGMP current max number of groups = 4096
IGMP stored max number of groups = 4096
To Next Page
Loading...
