Enterasys Matrix 2G4072-52 - Clear Spantree Lpwindow

Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-135
6.2.3.14 clear spantree lpwindow
Use this command to reset the Loop Protect event window to the default value of 180 seconds.
clear spantree lpwindow
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the Loop Protect event window to the default of 180 seconds:
Matrix(rw)->clear spantree lpwindow