Logging And Network Management Command Set
Configuring RMON
11-82 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.4.24 set rmon matrix properties
Use this command to configure an RMON matrix entry.
set rmon matrix properties index port-string [owner]
Syntax Description
Command Defaults
If owner is not specified, monitor will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to configure RMON matrix entry 1 for fe.1.1
index Specifies an index number for this entry. An entry will
automatically be created if an unused index number is
chosen. Maximum number of entries is 2. Maximum
value is 65535.
port-string Specifies port(s) on which to monitors statistics.
owner (Optional) Specifies the name of the entity that
configured this entry.
Matrix(rw)->set rmon matrix properties 1 fe.1.1
To Next Page
Loading...
Need help?
General