Enterasys Matrix 2G4072-52 - Show Policy Disabled-Ports

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-49
8.3.2.12 show policy disabled-ports
Use this command to display ingress ports disabled by the first use of an associated rule. This
command is only in effect if the port disable function has been enabled using the set policy rule
command as described in Section 8.3.2.4.
show policy disabled-ports
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display information about ports disabled by the first use of a policy rule.
In this case, no ports have been disabled:
Matrix(rw)->show policy disabled-ports
Disabled-ports :none