VLAN Configuration Command Set
Reviewing Existing VLANs
Matrix DFE-Platinum and Diamond Series Configuration Guide 7-3
7.3 VLAN CONFIGURATION COMMAND SET
7.3.1 Reviewing Existing VLANs
Purpose
To display a list of VLANs currently configured on the device, to determine how one or more
VLANs were created, the ports allowed and disallowed to transmit traffic belonging to VLAN(s),
and if those ports will transmit the traffic with a VLAN tag included.
Command
The command needed to review existing VLANs is listed below and described in the associated
section as shown.
• show vlan (Section 7.3.1.1)
To Next Page
Loading...
