Security Configuration Command Set
Configuring MAC Locking
14-124 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.9.4 set maclock disable
Use this command to disable MAC locking on one or more ports.
set maclock disable [port_string]
Syntax Description
Command Defaults
If port_string is not specified, MAC locking will be disabled on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable MAC locking on fe.2.3:
port_string (Optional) Disables MAC locking on specific port(s). For
a detailed description of possible port_string values, refer
to Section 4.1.1.
Matrix(rw)->set maclock disable fe.2.3
To Next Page
Loading...
