IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-77
12.2.8.3 ip slb serverfarm
Use this command to identify an LSNAT server farm and enable server load balancing (SLB) server
farm configuration mode.
ip slb serverfarm serverfarmname
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command deletes the server farm from the LSNAT
configuration:
no ip slb serverfarm serverfarmname
Command Type
Router command.
Command Mode
Global configuration mode: Matrix>Router1(config)#
Command Defaults
None.
Example
This example shows how to identify a server farm named “httpserver” and enable configuration
mode for that server farm:
serverfarmname Specifies a server farm name.
Matrix>Router1(config)#ip slb serverfarm httpserver
Matrix>Router1(config-slb-sfarm)#
To Next Page
Loading...
Need help?
General