Port Configuration Command Set
Enabling / Disabling Jumbo Frame Support
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-47
4.3.5 Enabling / Disabling Jumbo Frame Support
Purpose
To review, enable, and disable jumbo frame support on one or more ports. This allows Gigabit
Ethernet ports to transmit frames up to 10 KB in size.
Commands
The commands used to review, enable and disable jumbo frame support are listed below and
described in the associated section as shown.
• show port jumbo (Section 4.3.5.1)
• set port jumbo (Section 4.3.5.2)
• clear port jumbo (Section 4.3.5.3)
To Next Page
Loading...
Need help?
General