Enterasys Matrix 2G4072-52 - Show Lacp Outportalgorithm

Configuring LACP
Configuring Link Aggregation
4-124 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.5.4.18 show lacp outportAlgorithm
Use this command to display the current LACP outport algorithm.
show lacp outportAlgorithm
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current LACP outport algorithm
:
Matrix(rw)->show lacp outportAlgorithm
dip-sip