Enterasys Matrix 2G4072-52 User Manual

Configuring LACP
Configuring Link Aggregation
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-121
4.5.4.15 show lacp flowRegeneration
Use this command to display the LACP flow regeneration state.
show lacp flowRegeneration
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current LACP flow regeneration state
:
Matrix(rw)->show lacp flowRegeneration
disable

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English