Enterasys Matrix 2G4072-52 - Show Spantree Backuproottrapendable

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-81
6.2.1.68 show spantree backuproottrapendable
Use this command to display the state of the Spanning Tree backup root trap function.
show spantree backuproottrapenable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the backup root trap function:
Matrix(rw)->show spantree backuproottrapenable
Backup Root Trap is set to enable