IGMP Configuration Command Set
Configuring IGMP
Matrix DFE-Platinum and Diamond Series Configuration Guide 10-17
10.4.2.8 set igmp delete
Use this command to remove IGMP configuration settings for one or more VLANs.
set igmp delete vlan-list
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove IGMP configuration settings for VLAN 104:
vlan-list Specifies the VLAN(s) on which configuration settings will
be cleared.
Matrix(rw)->set igmp delete 104
To Next Page
Loading...
